PHP Acceleration with eAccelerator

With high traffic sites, performance issue’s rise. Now one of the solutions is to use an opcode caching mechanism for PHP. There are two mainstream open source solutions for that, APC and eAccelerator. And there is Zend platform and Zend core.

Installing eAccelerator
I found a very straight forward howto about installing eAccelerator (and others) on Debian.

But, as always, there are some problems with that tutorial. First the -- is replaced by a special character on that tutorial (and in my blog if I don’t use the <code> tag) in the configure command, so that doesn’t work if you copy paste it. The working configure command is:


./configure --enable-eaccelerator=shared --with-php-config=/usr/bin/php-config

And you don’t need to do all the work as root, only the apt-get, the make install and the php.ini editing should be done as root (best practice, only use root privileges when needed).

Also the double quotes are changed into a special character in that tutorial, so if you get an error in your logs about unable to load \xe2\x80\x9deaccelerator.so\xe2\x80\x9d you copied them just like I did ;-)

This is what I put in the php.ini, without the special double quotes, and with one change


extension="eaccelerator.so"
eaccelerator.shm_size="16"
eaccelerator.cache_dir="/var/cache/eaccelerator"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="0"
eaccelerator.shm_prune_period="0"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"

The tutorial writer creates the cache directory in /tmp. But he fails to make the remark that /tmp is cleared on server restart. So that’s not really a good option. So I’ve done the following in stead


sudo mkdir /var/cache/eaccelerator
sudo chown www-data /var/cache/eaccelerator
sudo chmod 0755 /var/cache/eaccelerator

Yes, the 0644 from the eAccelerator wiki is what you want for the files being created in there, but not for the directory itself.

The big disadvantage of this way of installing it, is that you probably need to recompile it (after a make clean) and reinstall it on every update of PHP. But reading up on APC vs eAccelerator made me choose for the latter.

But does it really help?
Now, the results. What better to test then my own PHP blog (and yes it’s not the fastest one, it’s running on a VPS).

Before installing eAccelerator:

Server Software:        Apache/2.2.8
Server Hostname:        blog.delgurth.com
Server Port:            80

Document Path: / Document Length: 44436 bytes
Concurrency Level: 10 Time taken for tests: 397.121299 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 44796000 bytes HTML transferred: 44436000 bytes Requests per second: 2.52 [#/sec] (mean) Time per request: 3971.213 [ms] (mean) Time per request: 397.121 [ms] (mean, across all concurrent requests) Transfer rate: 110.16 [Kbytes/sec] received
Connection Times (ms) min mean[+/-sd] median max Connect: 0 0 0.3 0 6 Processing: 712 3961 1674.7 3696 10696 Waiting: 368 2177 1013.3 2033 6943 Total: 712 3961 1674.7 3696 10696
Percentage of the requests served within a certain time (ms) 50% 3696 66% 4454 75% 4977 80% 5270 90% 6225 95% 7039 98% 8188 99% 8632 100% 10696 (longest request)

After installing eAccelerator

Server Software:        Apache/2.2.8
Server Hostname:        blog.delgurth.com
Server Port:            80

Document Path: / Document Length: 44436 bytes
Concurrency Level: 10 Time taken for tests: 242.584585 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 44796000 bytes HTML transferred: 44436000 bytes Requests per second: 4.12 [#/sec] (mean) Time per request: 2425.846 [ms] (mean) Time per request: 242.585 [ms] (mean, across all concurrent requests) Transfer rate: 180.33 [Kbytes/sec] received
Connection Times (ms) min mean[+/-sd] median max Connect: 0 0 0.2 0 4 Processing: 430 2419 983.2 2330 6409 Waiting: 100 648 448.6 578 3025 Total: 430 2419 983.2 2330 6409
Percentage of the requests served within a certain time (ms) 50% 2330 66% 2798 75% 3051 80% 3246 90% 3712 95% 4182 98% 4614 99% 4901 100% 6409 (longest request)

So it helps also quite a bit on my wordpress install, it’s about a 33% performance increase!

Some material I read

P.s. yet another wordpress rant, if you have empty lines between <code> tags, wordpress inserts <p> tags there for you. Not very nice to my liking, since it breaks the formatting of the <code> tag, which I used to format the apache bench results…

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>